New wax ring, flange bolts, supply line, and shutoff valve — every connection installed and tested by a licensed master plumber. Midtown Plumbing installs toilets across the GTA 7 days a week, with same-day availability and a clear upfront price before any work begins.
No spam. Response within 1 business hour.
A toilet installation looks straightforward until the old unit comes off the floor. The condition of the flange, the height of the rough-in, and the state of the shutoff valve only become visible once the work begins. Midtown Plumbing assesses all of this before a single connection is made — so any issue is identified, quoted, and resolved in the same visit rather than discovered after the new toilet is sitting on an uneven or corroded base. Available across the GTA, 7 days a week, with same-day scheduling and a written price before any work starts. See all plumbing services available across the service area.
Standard replacements, first-time installations, flange repairs, and comfort height upgrades — handled in a single visit.
The existing toilet is shut off, drained, and removed. A new wax ring is set, the toilet is bolted securely to the flange, and the supply line is connected and leak-tested. If the old shutoff valve is stiff or corroded, it is replaced as part of the job — not left as a potential failure point behind the new installation.
Installing a toilet where none existed requires a rough-in assessment to confirm the flange position, supply line run, and drain connection. Midtown Plumbing evaluates the bathroom plumbing layout and provides a written quote before any work begins. The rough-in dimensions are confirmed against the new toilet's specifications before the unit is set.
A cracked, broken, or corroded flange is one of the most common causes of a toilet that rocks or leaks at the base. Midtown Plumbing inspects the flange when the old toilet is removed and repairs or reinforces it before setting the new unit. A wax ring alone cannot compensate for a compromised flange — the base needs to be solid.
Older angle stop valves behind toilets in GTA homes — particularly those installed in the 1980s and 1990s — are known to seize or fail under load. If the existing shutoff cannot be operated cleanly, it is replaced during the installation so the homeowner has a working, reliable isolation point at the toilet.
Swapping a standard-height toilet for a taller comfort height model, or upgrading to a dual-flush unit for water efficiency, involves the same installation process as a standard replacement. Midtown Plumbing advises on rough-in dimensions and any adjustments needed before the new model is ordered or delivered.
After bathroom tile work, flooring replacement, or a full renovation, the toilet often needs to be reset on a new floor height with an updated wax ring or flange extension. Midtown Plumbing reconnects and resets the toilet once the finished floor is in — so the installation is level, sealed, and code-compliant when the renovation wraps.
Removing the old toilet reveals what was hidden underneath. If the flange is cracked or sitting too low, Midtown Plumbing identifies and resolves it before setting the new unit — not after you've already paid for an installation that will rock or leak within months.
An angle stop valve that has not moved in twenty years will often fail or crack when turned. Midtown Plumbing tests the shutoff before beginning and replaces it if it cannot be relied on — so the installation is complete, not just the toilet itself.
Every installation ends with the toilet flushed multiple times while the base seal, supply connection, and tank fittings are all checked for any sign of weeping. Nothing is left for the homeowner to discover on the first use after the plumber has gone.
Available Monday through Sunday, 7 AM to 9 PM. Most toilet installations across the GTA are scheduled and completed the same day — no waiting until the following week with an out-of-service bathroom.
The full cost is confirmed before the first fitting is touched. If the flange needs repair or the shutoff valve needs to be replaced, a revised quote is provided and approved before proceeding. No charges are added after the job is underway.
Four steps from the first call to a properly set, fully tested toilet.
The plumber confirms the rough-in measurement, inspects the shutoff valve condition, and reviews the flange before the old toilet is removed. Any issues are identified and quoted upfront — so there are no surprises once the existing unit comes off the floor.
The supply is shut off, the tank drained, and the toilet disconnected and removed. The flange is inspected for cracks, corrosion, or incorrect height. Any required repair is handled before the new wax ring is set — not after.
A fresh wax ring is set, the toilet is positioned squarely over the flange, bolted down evenly without overtightening, and the supply line is connected. If the shutoff valve was replaced, the new valve is tested before the supply line is connected to the fill valve.
The toilet is flushed multiple times while the plumber checks the base seal, tank connections, and supply line for any sign of moisture. The floor is cleaned and the old toilet and packaging are removed. The shutoff valve location is pointed out before leaving.
A straightforward replacement costs less than a flange repair or first-time rough-in. The quote is always provided before work begins — there are no charges that appear mid-job.
Factors that affect installation cost:
Quoted before work begins — no surprises
Replacement vs. first-time install — A straight swap uses the existing flange position and rough-in. A first-time install requires confirming the rough-in layout and may involve additional plumbing work.
Flange condition — A cracked, corroded, or incorrectly positioned flange needs repair before the new toilet can be properly sealed. This is assessed after the old unit is removed and quoted before any repair begins.
Shutoff valve replacement — Angle stops that have seized or show signs of corrosion are replaced during the installation. A working, reliable shutoff is part of a complete and code-compliant installation.
Supply line condition — If the existing braided supply line is aged or has visible wear, it is replaced. Running a new toilet off a compromised supply line introduces a failure point Midtown Plumbing will not leave in place.
Call before booking if you have questions about expected cost — Midtown Plumbing can provide a phone estimate for standard replacement jobs and advise on what additional work is likely based on the home's age and construction.
Get a Free QuoteToilet installation across the full GTA service area — same licensed plumber, same upfront pricing commitment in every city.
Same-day toilet installation available in every listed city — call 647-778-9411, Mon–Sun 7 AM to 9 PM.
Answers to what GTA homeowners ask most before booking toilet installation.
Verified Google reviews from homeowners across the GTA.
"Thank you Andrew for your assistance and wonderful workmanship with the new installation of our toilets and sink. I will reach out to you for my next plumbing needs."
"Andrew installed 2 toilets and a kitchen faucet. He also changed the cartridges of my sink taps and shower taps. Responsive, quick and knowledgeable — he made everything look so easy to do."
"Andrew answered my call immediately, explained options and pricing on the phone, and was at my place within two hours. He had a new toilet installed perfectly within two hours of that — everything completed within 3.5 hours of my initial call. Not only did he do a great job, but it was a pleasure to experience his professionalism."
Same-day service across the GTA. Licensed master plumber. Upfront written pricing — no charges added after the job starts.
Call 647-778-9411
